Profoto Acute2 manual Guide de l'utilisateur télécharger pdf (Page 13)

BatPac

www.profoto.com

Battery exchange

The battery is accessed by opening the Battery/Fuse Compartment [14] on the BatPac

Bag. Only exchange battery by yourself if you are absolutely certain how to do it –

otherwise contact your nearest Profoto service station! Only use sealed lead acid batteries

recommended or supplied by Profoto.

Changing fuses

The fuses are accessed by opening the Battery/Fuse Compartment [14] on the bag. The

two Fuse Holders [18] are mounted along the cables between the positive battery pole

and the battery switch.

1. Ensure that the BatPac is completely switched off by turning the Battery Switch [7]

counterclockwise and removing the key.

2. Open the lid of the Fuse Holder [18] and pull out the Fuse [17].

3. Gently push the new Fuse [17] all the way into the Fuse Holder [18]. Only use fuses

specified in section Technical data.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Pas de commentaire

Profoto Acute2 manual Guide de l'utilisateur Page 13