Profoto Acute2 manual Guide de l'utilisateur télécharger pdf (Page 14)

BatPac

www.profoto.com

Product compatibility

The Profoto BatPac can be used with the following Profoto flashes:

Profoto flash Max no. of

connected flash

units

Comments

Profoto D1 (all models) in Bat mode 4 • Use a power strip to connect more than 2

units.

Profoto D1 (all models) in standard

mode

2 • Set model light to “DIM” or “OFF”.

Profoto Acute2 generator (all

models)

1 • Check voltage setting before connecting to

BatPac

• Turn off model light

Profoto ComPact (all models) 2 • Check voltage setting before connecting to

BatPac

• Turn off model light

• Use a power strip to connect more than 2

units.

Furthermore it is possible to use the BatPac to power other equipment like camera chargers,

computers, wind machines, constant light sources etc. with a power consumption of max.

600W. For example it is possible to use a 100W halogen lamp on a fully charged BatPac for

about 45 minutes or a typical wind machine (150W) for about 30 minutes.

Never connect devices with a power consumption of more than 600W to a BatPac.

Always check the voltage of the equipment before you connect it to the BatPac! Use 100-

120V units on the BatPac 120V and 200-240V units on the BatPac 230V only!

Please get in contact with the manufacturer before you use a non Profoto flash with

BatPac! Profoto has not tested and cannot guarantee full functionality of flashes made by

other manufacturers when used with BatPac.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Pas de commentaire

Profoto Acute2 manual Guide de l'utilisateur Page 14